Umthamo wokwakha ophezulu: 800 * 800 * 550 mm (umgangatho we-550mm, ubunzulu betanki ye-resin inokwenziwa ngokwezifiso)
Ngetekhnoloji yokuskena eguquguqukayo.
Ukunyamezela kwe-resin enkulu kunye nomsebenzi wokuzalisa ngokuzenzekelayo.
Itekhnoloji eninzi eqinisekisa ukuchaneka okuphezulu, uzinzo oluphezulu, kunye nokusebenza okuphezulu koshicilelo lwebhetshi enkulu.
| Umzekelo | 3DSL-800 |
| XY ubungakanani befom ye-axis | 800mm×800mm |
| Ubungakanani befom ye-axis engu-Z | 100-550mm |
| Ubungakanani bomatshini | 1930mm×1460mm×2200mm |
| Ubunzima bomatshini | 1500kg |
| Qala ipakethe | 560kg(550kg+10kg) |
| Ukuphumelela koshicilelo | ubuninzi 400g/h |
| Ubunzima bokushicilela obukhulu | 80kg |
| Resin ukunyamezela | 15kg |
| Indlela yokuskena | ukuskena umqadi oguquguqukayo |
| Ukwenza ukuchaneka | ±0.1mm(L≤100mm), ±0.1%×L (L>100mm) |
| Indlela yokufudumeza i-resin | ukufudumeza umoya oshushu (ukhetho) |
| Isantya esiphezulu sokuskena | 10m/s |
| Itanki yokugcina intlaka | Ewe |
| I-resin vat | / |
| I-vat encedisayo | / |
| Uhlobo lwe-resin | SZUV-W8001(white), SZUV-S9006(high toughness), SZUV-S9008(flexible), SZUV-C6006(clear), SZUV-T100(high heat resistance), SZUV-P01(ubumanzi-ubungqina), abanye |
| Uhlobo lweLaser | I-laser ye-355nm eqinileyo |
| Amandla eLaser | 3w@50KHz |
| Inkqubo yokuskena | iskena segalvanometric |
| Indlela yokubuyisela kwakhona | indawo ekrelekrele ukumisa vacuum recoating |
| Umaleko ubukhulu | 0.03- 0.25mm (umgangatho: 0.1mm; ukuchaneka: 0.03- 0.1mm; ukusebenza kakuhle: 0.1- 0.25mm) |
| Injini yokunyusa | Injini ye-servo echanekileyo ephezulu |
| Isigqibo | 0.001mm |
| Ukubekwa ngokutsha Ukuchaneka | ±0.01mm |
| Iqonga leDatum | ibhastile |
| Inkqubo yokusebenza | Windows7/10 |
| Lawula isoftware | SHDM SL 3D Printer Control Software V2.0 |
| Ifomathi yefayile | STL / SLC ifayile |
| I-intanethi | Ethernet / Wi-fi |
| Igalelo lamandla | 220VAC,50HZ,16A |
| Ubushushu/ukufuma | 24-28℃/35-45% |
